Automotive

18 Pole Magneto Stator Coil for 250cc 260cc CN250 CH250 ATV Scooter

You turn the key. The engine cranks, sputters — and dies. Or worse, nothing happens at all.

If that sounds familiar, your stator coil may be the problem. This 18 pole magneto stator coil is a replacement charging part built for 250cc and 260cc CN250 and CH250 ATV and scooter engines — and in this review, we break down what it is, who it fits, and whether it is the fix your machine has been waiting for.

In this article
  1. What Is an 18 Pole Magneto Stator Coil?
  2. Key Features at a Glance
  3. Compatibility: Will It Fit Your Ride?
  4. Who Is It For?
  5. Signs Your Stator May Be Failing
  6. What to Check Before You Order
  7. Installation Notes
  8. Final Verdict
  9. Frequently Asked Questions

What Is an 18 Pole Magneto Stator Coil?

A magneto stator coil is the part of your engine’s charging system that generates electricity while the engine runs.

As the flywheel turns around it, the copper windings produce the current that powers the ignition and charges the battery. That is what keeps your lights, starter and electrics working.

Look closely at the product photo and you will see the design: eighteen copper-wound poles arranged in a ring, with a wiring harness and connectors ready to plug into your machine’s electrical system.

Key Features at a Glance

  • 18 copper-wound poles arranged in a ring for the charging system
  • Wiring harness with connectors for hooking into your machine’s electrical system
  • Built as a replacement for CN250 and CH250 engines
  • Made to fit 250cc and 260cc ATV and scooter engines
  • Direct-style replacement — match the pole count and connectors with your old stator before ordering

Compatibility: Will It Fit Your Ride?

This 18 pole magneto stator coil is made as a replacement for CN250 and CH250 engines fitted to 250cc and 260cc ATVs and scooters. Before you order, check that your machine matches the fitment below:

  • 250cc CN250 ATV and scooter engines
  • 260cc CN250 ATV and scooter engines
  • 250cc CH250 ATV and scooter engines
  • 260cc CH250 ATV and scooter engines

Who Is It For?

This stator coil is for you if any of these sound familiar:

  • Your 250cc or 260cc CN250 or CH250 ATV or scooter will not start or will not hold a charge
  • You are replacing a failed or worn-out stator coil
  • You like to do your own repairs and can match the 18-pole layout and connectors to your old part
  • You want a straightforward replacement built for your CN250 or CH250 engine

Signs Your Stator May Be Failing

Stators wear out over time, and a failing one usually shows up in the electrical system first. Watch for these warning signs:

  • Hard starting, or the engine cranks but will not fire
  • A battery that keeps going flat even after charging
  • Dim or flickering lights
  • The engine cutting out while riding

These symptoms can have other causes too, so it is worth checking the battery, the regulator/rectifier and the wiring before deciding the stator is at fault.

What to Check Before You Order

To make sure this 18 pole magneto stator coil fits your ride, match your engine code (CN250 or CH250) and engine size (250cc or 260cc), count the poles on your old stator, and compare the wiring harness and plugs on your original part with the ones shown in the product photo.

If the connectors and pole count match, it is the right type of replacement for your machine.

Installation Notes

Fitting a stator coil means opening up the engine cover, so follow your machine’s service manual for the exact steps.

Disconnect the battery first, route the new wiring harness the same way as the old one, and make sure every connector seats fully before you button everything back up and test the charging system.

Final Verdict

If your ATV or scooter runs a 250cc or 260cc CN250 or CH250 engine and your charging problems point to a dead stator, this 18 pole magneto stator coil is a direct-style replacement built for exactly that fitment.

Confirm the engine code and compare the connectors with your old stator first, and it should get your ride charging and starting properly again.

Frequently Asked Questions

What engines does this 18 pole magneto stator coil fit?

It is made for 250cc and 260cc CN250 and CH250 ATV and scooter engines. Check your engine code before ordering to confirm the fit.

How many poles does it have?

Eighteen. The copper-wound poles are arranged in a ring, as shown in the product photo.

How do I know if my stator is bad?

Common signs are hard starting, a battery that keeps going flat, dim or flickering lights, and the engine cutting out. Check the battery, regulator/rectifier and wiring first, since those can cause the same symptoms.

Is this a direct replacement for my old stator?

It is built as a replacement for CN250 and CH250 engines. Compare the 18-pole layout and the wiring harness and connectors with your original stator to confirm the fit.

Where can I check the price and availability?

Use the Check Product button above to see the current price and availability on Amazon.

Written by Md Abdullah Al Muti

Software Engineer based in Bangladesh with more than eight years of technology experience. Publisher of DailyFindz.